Maintenance and Service Guide

3. Lift the right side of the system board upward (1), and then pull it up and to the right to remove it from
the computer (2).
Reverse this procedure to install the system board.
Speakers
To remove the speakers, use this procedure and illustration.
Table
6-10 Speaker description and part number
Description Spare part number
Speaker Kit M02060-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (Bottom cover on page 29).
3. Remove the battery (see Battery on page 37).
Remove the speakers:
1. Remove the Phillips M2.0 × 4.0 screw (1) that secures each speaker to the computer.
2. Remove the cable from the clips in the speaker near the hard drive (2).
50 Chapter 6 Removal and replacement procedures for authorized service provider parts