Maintenance and Service Guide

3. Remove the speakers from the computer (3).
Reverse this procedure to install the speakers.
Display assembly
To remove and disassemble the display assembly, use these procedures and illustrations.
NOTE: Spare parts are available for display assemblies only at the subcomponent level.
Before removing the display panel, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (Bottom cover on page 29).
3. Disconnect the battery cable from the system board (see Battery on page 37).
Remove the display assembly:
1. Open the computer to open the hinges (1).
2. Disconnect the antenna cables from the WLAN module (2) and remove the cables from the routing path
in the computer (3).
Component replacement procedures 51