Maintenance and Service Guide

a. Insert a at tool between the bezel and the display to release the bezel (1).
b. Flex the top (2), left and right sides (3), and bottom of the bezel (4) to release it.
c. Remove the bezel from the display (5).
The bezel is available as spare part number M02047-001.
7. If you need to remove the camera module:
▲ Lift up evenly across the module and peel the module up from the display back cover (1), and then
disconnect the cable from the module (2). The camera module is available as spare part number
M02061-001.
8. If you need to remove the display panel:
Component replacement procedures 53