Maintenance and Service Guide

a. The display panel is secured to the display enclosure with tape that is installed under the left and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape. While
turning the tweezers, wrap the tape around the tweezers (1) as you continue to pull the tape out
from behind the display panel (2). You must pull the tape multiple times before it is completely
removed.
b. Turn the display panel over and place it next to the display enclosure (3).
Display panels are available as the following spare part numbers:
M02080-001: 250 nits
M02081-001: 300 nits, 60 Hz
M02082-001: 300 nits, 144 Hz
Display panel adhesive is available as spare part number M03601-001.
c. Disconnect the cable from the panel (1).
d. Remove the panel (2).
54 Chapter 6 Removal and replacement procedures for authorized service provider parts