QuickSpecs

QuickSpecs
HP EliteDesk 705 G1 Series Business Desktop
Technical Specifications Hard Disk and Solid State Storage
Americas HP EliteDesk 705 G1 Series Business Desktop January 2015 - c04405870
Page 28
DPS Self-Test can be executed on physical hard drives while in RAID mode.
The RAID Setup Utility (accessed through CTRL-I) can be protected by the F10 Setup password.
NOTE:
RAID 1 is the only RAID configuration offered via factory configurations. The pre-configured systems:
Are only available on the SFF and TWR form factors. The DM form factors do not support RAID as they do not allow for
multiple common storage drives.
Are complete RAID systems and have both drives installed. If the TWR is configured with three hard disk drives, the third
drive is would be un-partitioned and not part of the RAID array
Have the necessary Option ROM configuration.
Include a preinstalled operating system that is mirrored mode out of the box.
HP 1TB* 10K rpm SATA 6.0Gb/s 3.5” Hard Disk Drive
Unformatted Capacity
1 TB
Rotational Speed
10,000 rpm
Interface
Serial ATA (6.0 Gb/s)
Synchronous Transfer Rate
(Maximum)
Up to 600 MB/s
Buffer Size
64 MB
Cache
Adaptive
Seek Time (typical reads,
includes controller overhead,
including settling)
Single Track:
1.2 ms
Average:
3.6 ms
Full-Stroke:
9.0 ms
Height (nominal)
0.6 in/1.53 mm
Width (nominal)
Media diameter: 2.5 in/63.6 mm
Physical size: 2.75 in/69.9 mm
Operating Temperature
41° to 131° F (5° to 55° C)
HP 500 GB* 10K rpm SATA 6.0Gb/s 3.5” Hard Disk Drive
Unformatted Capacity
500 GB