Owner's manual

21
HP StorageWorks Disk System 2120
English
Remove the Disk System
Reverse the installation instructions enclosed with the rackmount kit for your cabinet:
■ A7552A - Hewlett-Packard Rack Systems/E for Enterprise Systems
■ A5680A - all other Hewlett-Packard rack systems for Enterprise Systems
purchased before November 1998.
If your disk system is a factory-integrated unit, see the figure below for removal
instructions.
FIGURE 12 Removing the Disk System
If you are exchanging a desktop disk system, be sure to remove and store the plastic
Desktop Disk System Cover for use on the replacement disk system.
Some data paths may be slot-dependent. Be sure to note the slot from which
the disk module is removed so it can be installed in the same slot in the
replacement disk system.
CAUTION