User's Manual

25
Enter your current code using the 7.
Numeric buttons.
If the code is validated, a new dialogue box
will prompt you to enter your new code.
Enter the new code using the 8. Numeric
buttons.
A message appears prompting you to enter
the new code again for confirmation.
NOTE
If you forget your code, enter ‘8888’ to •
override any existing codes.
Lock or unlock all channels and connected
devices.
Press1. MENU.
Press 2. ▲ ▼ ◄ ► to select Features ►
TV lock.
Press 3. ► to enter the TV Lock.
A screen appears prompting you to enter 
a code.
Enter your code using4. Numeric buttons.
Press 5. ▲ ▼ to select Lock or Unlock.
Press 6. OK.
All channels and connected devices are
locked or unlocked.
Press 7. MENU to exit.
NOTE
If you select • Lock, you have to enter your
code every time you turn on your TV.
Once you set the code, step 3 and 4 won’t •
appear before turn off the TV.
Lock or unlock one or more channels
When watching TV, press 1. CH LIST to
display the channel list.
Press 2. ▲ ▼ ◄ ► to select a channel to
lock or unlock.
Press 3. ►.
Press 4. ▲ ▼ select Lock channel/Unlock
channel.
For each selection, press 5. OK to lock or
unlock the channel.
Automatically switch the TV on
(On timer)
On timer switches the TV to a specified channel at
a specified time from standby.
Press 1. MENU.
Select 2. Features ► On timer.
Press 3. ► to enter the On timer menu.
Press 4. ▲ ▼ ◄ ► to select Activate and
set a frequency Daily, Once, or Off .
Press 5. OK to confirm.
Press 6. ▲ ▼ ◄ ► to select Time and set the
starting time.
Press 7. Done to confirm.
Press 8. ▲ ▼ ◄ ► to select Programme
no. and external source to set the channel.
Press 9. OK to confirm.
Press 10. MENU to exit.
NOTE
Select • On timer ► Activate ► Off to
disable On timer.
When • On timer is Off, only Activate can
be selected.
Set the • TV clock before activating On
timer feature.
Use TV Lock
You can prevent your children from watching
certain programmes or certain channels by locking
the TV controls.
Set / change code
Press 1. MENU.
Press 2. ▲ ▼ ◄ ► to select Features ►
Set code.
Press3. ► to enter the code setup.
Enter your code using the 4. Numeric
buttons.
Re-enter the same code in the new dialogue 5.
box for confirmation.
If the code is set successfully, the dialogue
box will disappear. However, if the code
cannot be set, a new dialogue box will
prompt you to re-enter the code.
If you want to change the code, select 6.
Features ► Change code.