User's Manual

Table Of Contents
Table 2-1 Right-side components and their descriptions (continued)
Component Description
Connects a USB device, provides high-speed data transfer, and
(for select products) charges small devices when the computer
is on or in Sleep mode.
– and –
Connects a display device that has a USB Type-C connector,
providing DisplayPort output.
NOTE: Cables, adapters, or both (purchased separately) might
be required.
(4) Battery light When AC power is connected:
White: The battery charge is greater than 90 percent.
Amber: The battery charge is from 0 to 90 percent.
O: The battery is not charging.
When AC power is disconnected (battery not charging):
Blinking amber: The battery has reached a low battery
level. When the battery has reached a critical battery level,
the battery light begins blinking rapidly.
O: The battery is not charging.
(5) Power connector Connects an AC adapter.
(6) microSD™ memory card reader Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
1. Hold the card label-side up, with the connectors facing the
computer.
2. Insert the card into the memory card reader, and then
press in on the card until it is rmly seated.
To remove a card:
Press in on the card, and then remove it from the memory
card reader.
(7) Audio-out (headphone)/Audio-in (microphone)
combo jack
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional standalone microphones.
WARNING! To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, see the Regulatory, Safety,
and Environmental Notices.
To access this guide:
Type HP Documentation in the taskbar search box,
and then select HP Documentation.
4 Chapter 2 Components