HP ProDesk 400 G4 Small Form Factor (SFF) - Maintenance and Service Guide

Front bezel
1. Prepare the computer for disassembly (see Preparation for disassembly on page 23).
2. Remove the access panel (see Access panel on page 24).
3. Position the computer in the horizontal mode with the front facing toward you.
4. Release the four tabs (1) on the top of the front bezel from the computer chassis.
5. Swing the top edge of the front bezel (2) away from the computer chassis.
6. Remove the front bezel.
Reverse this procedure to install the front bezel.
Front bezel 25