User Guide
2 Installing the memory module in your
computer
The procedure to install the module diers depending on your computer model. If you need help preparing
your computer model for this installation, refer to the documentation provided with the computer, or go to
http://www.hp.com/support to locate the manual for your model.
Models with M.2 connectors
NOTE: If there are two M.2 connectors on the system board, install the memory module in the second M.2
connector to avoid potential Electromagnetic interference.
Install the module onto the system board.
1. Locate the supported M.2 connector on your system board. The connector is labeled SSD.
2. If necessary, install the screw stando into hole near the connector.
3. Insert the module into the M.2 connector (1).
Models with M.2 connectors 3