Hardware Reference Guide

12. Replace the drive cage. Slide the tabs on the right side of the drive cage into the slots on the chassis (1),
and then press the left side of the drive cage down onto the chassis (2).
13. Reconnect the power and data cables to all drives in the drive cage.
14. Replace the front bezel.
15. Replace the computer access panel.
16. If the computer was on a stand, replace the stand.
17. Reconnect the power cord and any external devices, and then turn on the computer. The computer
should automatically recognize the additional memory.
18. Lock any security devices that were disengaged when the access panel was removed.
Upgrading system memory 17