HP Z440, Z640, and Z840 Workstation Series - Maintenance and Service Guide

Heading Option Description
USB Device Control Set workstation USB ports to Enabled/Disabled:
●
Front USB Ports
●
Rear USB Ports
—
USB Port 1
—
USB Port 2
—
USB Port 3
—
USB Port 4
—
USB Port 5
—
USB Port 6
●
Internal USB Ports
—
USB Port 1
—
USB Port 2
—
USB Port 3
Slot Settings Lets you enable or disable any PCIe slot.
System Security Provides these options:
●
Virtualization Technology (VTx)—Enables or disables Intel Virtualization
Technology to increase workstation performance. (Only visible on supported
processors)
●
Virtualization Technology Directed I/O (VTd)—(Enabled or Disabled) Controls the
underlying processor and chipset features needed to support a virtual appliance.
●
Trusted Execution Technology—(Disabled/Enabled) Turns Intel TXT feature on or
o.
●
OS Management of Embedded Security Device—Enables or disables the ability of
the operating system to control the TPM device, including turning it on and o,
initializing it, and resetting it.
—
Reset of Embedded Security Device through OS—Enables or disables the
ability of the operating system to reset the TPM. Available only when OS
Management of Embedded Security Device is enabled.
—
No PPI provisioning
—
Allow PPI policy to be changed by OS
Advanced Boot Options Enables you to congure the boot order by physically reordering the menu entries. The
following is the default boot order presented in the menu:
●
UEFI Boot Sources
—
OS-specic Boot Manager
—
ATAPI CD/DVD Drive
—
USB Floppy/CD
—
USB Hard Drive
—
Hard Drive (may only appear if the device has an EFI boot le on it)
●
Legacy Boot Sources
—
ATAPI CD/DVD Drive
—
USB Floppy/CD
Computer Setup (F10) Utility 29