HP Z440, Z640, and Z840 Workstation Series - Maintenance and Service Guide

Heading Option Description
—
Runtime Power Management—(Enable or Disable)
—
Idle Power Savings—Extended (default) or Normal; extended mode reduces
processor power consumption when the processor is idle.
—
Unique Blink States—(Enable or Disable)
●
Thermal Options—Lets you set the rate of the system fan when the processor is in
idle.
●
Hardware Power Options
—
After Power Loss (On, O, Previous State)—”On” means the system will
power on again after power is restored. “O” means it will remain shut down
after power is restored. “Previous State” directs the previous state to be the
default after power is restored.
—
S4/S5 Max Power Savings (Disables/Enabled)
Management
Operations
Lets you set the following AMT (Intel Active Management Technology) conguration
options:
●
AMT—(Enabled/Disabled) Allows for remote discovery, repair and protection of
networked workstations. Enabling the AMT function also enables the Network
Controller (required for AMT to function correctly).
●
Uncongure AMT/ME—(Disabled/Enabled) Restores AMT/ME defaults. When you
save and exit after enabling this option, you will be prompted to complete the
process upon restart. A Setup Password (even if one is set) does not need to be
entered to complete the process.
NOTE: Information about Intel AMT can be found at www.intel.com.
●
Hide Un-Congure ME Conrmation Prompt—(Disabled/Enabled)
●
WatchDog Timer—(Enabled/Disabled) OS and BIOS WatchDog Timers can be set
independently (in minutes):
—
OS WatchDog Timer—Sets the OS WatchDog Timer
—
BIOS WatchDog Timer—Sets the BIOS WatchDog Timer
Option ROM Launch
Policy
●
PXE Option ROMS—(Legacy, UEFI Only, Do Not Launch)
●
Storage Option ROMS—(Legacy, UEFI Only, Do Not Launch)
●
Video Option ROMS—(Legacy, UEFI Only)
Network BIOS Update
●
Congurations
●
Check for Updates Now
Update BIOS via
Network
●
Update BIOS via Network—(Enable/Disable)
●
Update Source—(HP, Custom)
●
Update Address (Only appears if Custom is selected in Update Source)
●
Automatic BIOS Update Setting—(Enable/Disable)
For more information about Updae BIOS via Network, go to
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/
public/psi/mostViewedDisplay/?
sp4ts.oid=5403903&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.por
tlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-
interactionState%3DdocId%253Demr_na-c04119260%257CdocLocale
%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken.
Computer Setup (F10) Utility 31