HP Business Notebook and Desktop PC F10 setup overview Technical White Paper Technical white paper

12
Feature
F
UNCTION
Default setting,
if applicable
Reboot
required
Intel Rapid Start
Technology
E
NABLES
I
NTEL
R
APID
S
TART
T
ECHNOLOGY
,
WHICH IMPROVES BATTERY LIFE
AND SYSTEM RESUME TIME ABOVE CURRENT
STANDBY AND HIBERNATE LEVELS.
NOTE: THIS FEATURE ONLY WORKS WHEN AN SSD IS DETECTED. CURRENTLY,
IT IS ONLY SUPPORTED IN M
SATA SSD-BASED SOLUTIONS.
Disabled Yes
Entry on S3 RTC wake Enables RTC wake to trigger the transition from S3 to Intel Rapid
Start Technology
Disabled Yes
S3 Wake Timer Specifies the length of time the system remains in S3 before an
RTC wake event is triggered
5 minutes Yes
Entry on S3 Critical
Battery wake event
Enables critical battery event support on Intel Rapid Start
Technology; wakes the system to provide an alert that the
battery-level is low
Disabled Yes
Express Card Link
Speed
Sets speed for Express Card Link. Generation 1 will set the Link
Speed to max 2.5 Gbit/s and Generation 2 will set the Link Speed
to a maximum of 5.0 Gbit/s
Generation 2 Yes
• Dynamic Platform and
Thermal Framework
(DPTF) 6.0
Allows users to set maximum power consumption on select Intel
platforms
Enabled Yes
• Configurable TDP Lock Thermal Design Power (TDP) Lock feature locks power
consumption to a nominal value on select Intel platforms
Disabled Yes
• LPM Uses Low Power Mode (LPM) setting requested by OS OS-specific N/A
• Configurable TDP Boot
Mode
Allows the user to specify the default power consumption on
select Intel platforms
TDP Down Yes
• Smart Card Reader
Power Setting
Disables the power-saving feature of the Smart Card reader, thus
maintaining a session when the card is removed
Powered on if
card is present
Yes
Power Control Allows the scheduling of a peak shift period and a battery-
charging period
Enabled Yes
• Power on unit when AC
is detected
Turns on the unit when AC power is applied Disabled Yes
• Deep Sleep
T
URNS OFF POWER TO THE CHIPSET DURING
S
LEEP IN ORDER TO ENHANCE
BATTERY LIFE
Off: Disables the feature
On: Power to the chipset is always turned off during Sleep.
Auto: System decides whether or not to turn power off
depending on battery state
Auto Yes
Built-in Device Options
4
N/A
• Wireless Button State Enables wireless button
Note: If this feature is disabled, the WLAN device cannot be
toggled on and off using the wireless button
Enabled Yes
• Embedded WLAN
Device
Enables integrated 802.11 device Enabled Yes
• Embedded WWAN
Device
Enables integrated WWAN device Enabled Yes
• WWAN Quick Connect Maintains power to the WWAN device to provide faster network
connection
Note: Also maintains power during S3
Enabled Yes
• Embedded GPS Device Enables integrated GPS device Enabled Yes
4
All devices not supported on all systems.