HP ProBook 640 G2 Notebook PC, HP ProBook 645 G2 Notebook PC, HP ProBook 650 G2 Notebook PC and HP ProBook 655 G2 Notebook PC - Maintenance and Service Guide

a. Service door (see Service door on page 37).
b. Remove the battery (see Battery on page 38)
c. Hard drive (see Hard drive on page 39).
d. Solid-state drive (see Solid-state drive (select products only) on page 41).
e. WWAN module (see WWAN module (select products only) on page 42).
f. WLAN module (see WLAN module on page 44).
g. Optical drive (see Optical drive on page 46).
h. Keyboard (see Keyboard on page 48).
i. Hinge covers (see Hinge cover on page 55).
j. Base enclosure (see Base enclosure on page 57).
k. System board (see System board on page 59).
To remove the fan and heat sink assembly for products with discrete graphics:
1. Disconnect the cable (1) from the system board.
2. Loosen 6 Phillips captive screws (2).
3. Lift the fan and heat sink assembly (3) to remove it .
To remove the fan and heat sink assembly for products with integrated graphics:
1. Disconnect the cable (1) from the system board.
2. Loosen 4 Phillips captive screws (2).
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts