HP EliteDesk 800 G3 Desktop Mini, HP ProDesk 600 G3 Desktop Mini, HP ProDesk 400 G3 Desktop Mini - Maintenance and Service Guide

16. On the rear of the computer, remove the antenna cover by pressing on the tab on the top of the cover
(1), and then rotating the cover o the computer (2).
17. Antenna transceivers are connected to the front and back of the computer as shown in the following
image.
18. Remove the front transceiver from the inside of the computer by pressing the tab to disengage the
transceiver and removing the transceiver.
54 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis