HP Z240 Workstation - Maintenance and Service Guide

Workstation specications
Tower
Processor
technology
Intel Series C236 chipset:
Support for the Intel Xeon Processor E3 v5 Family or sixth-generation Intel Core processors up to 95 W
Integrated 2-channel memory controller
Microarchitecture improvements
Integrated graphics (some models)
Advanced Vector Extensions (AVX) to increase oating point performance
Intel DMI3 interface connecting the processor to the I/O controller
Power supply
400 W, 92% ecient, compatible with ENERGY STAR Version 6.1 requirements
280 W, 90% ecient, compatible with ENERGY STAR Version 6.1 requirements
Supports European Union ERP Lot 6 tier2 power limit of less than 0.5 W in o mode
Memory
technology
Dual in-line memory modules (DIMMs) based on DDR4 2133MHz technology
Supports error checking and correcting (ECC) and non-ECC DIMMs
Two direct-attach memory channels enable low-latency access and fast data transfer
Up to 64 GB system memory (16 GB DIMMs)
2133 MHz 4, 8, 16 GB ECC unbuered DIMM
2133 MHz 4, 8, 16 GB non ECC unbuered DIMM
Graphics cards
Supports:
Up to PCIe Gen 3 bus speeds.
PCIe x16 cards are supported in both x16 mechanical slots. Multiple graphics cards are supported,
provided their total power consumption is less than 45W.
Up to three displays with integrated Intel HD graphics (depending on processor type).
The total number of displays supported depends on the number of graphics cards present, and the
number of outputs on each card.
Windows 10 supports display output from both integrated graphics capable processors and discrete
graphics cards. This feature is enabled by default, and can be changed through the Computer Setup
(F10) Utility.
NOTE: Most supported Intel Core processors provide Intel HD Graphics 510/530; Intel Xeon processors with
model designations that end in "___5" provide Intel HD Graphics P530.
NOTE: To drive more than three displays, use Computer Setup (F10) Utility to intermix integrated Intel HD
graphics and discrete graphics cards (with four or more displays, HP recommends using only discrete
graphics cards).
I/O technology
RAID congurations for SATA RAID levels 0, 1
Supports eSATA (3.0 Gbps) at only one SATA port (P3) using an optional adapter
Four external and two internal USB 2.0 ports
Six external and one internal USB 3.0 port
Two DisplayPort 1.2 connectors
One DVI-D connector
Serial header that can be used with an optional PCI bulkhead connector
HP Z240 Tower Workstation components 13