User Manual
Table Of Contents
- Locating HP resources
- Computer features
- Setting up the computer
- Backing up, restoring, and recovering
- Setting up Linux
- Updating the computer
- Maintenance, diagnostics, and minor troubleshooting
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Computer operating guidelines, routine care, and shipping preparation
- Electrostatic discharge
- Accessibility
- Index
Desktop rear components
To identify the rear panel components, use this illustration and table.
NOTE: Your computer model might look slightly dierent from the illustration in this section.
Table 2-2 Rear desktop components and their descriptions
Item Icon Component Item Icon Component
1 Antenna cover 7
DisplayPort™ (DP)
connectors (2)
2 RJ-45 (network) jack 8 Serial port (optional)
3
Access panel release
latch
9 USB ports (2)
4 USB SuperSpeed port 10
USB SuperSpeed Plus
ports (2)
5 Power connector 11 Expansion slot covers (4)
6
Audio line-out connector
(green)
NOTE: The labels for the rear panel connectors use industry-standard icons and colors.
NOTE: The DP ports are not supported when the system is congured with Intel® Xeon® E3-12x0 v5 processors. For all other
processors, these DP ports are disabled by default when a discrete graphics card is installed.
NOTE: Simultaneous use of integrated Intel HD graphics and discrete graphics cards to drive more than two monitors can be enabled
using Computer Setup. However, HP recommends using only discrete graphics cards when attaching three or more monitors.
Tower front components
To identify the front panel components, use this illustration and table.
Desktop rear components
5