User Manual
Table Of Contents
- Locating HP resources
- Computer features
- Setting up the computer
- Backing up, restoring, and recovering
- Setting up Linux
- Updating the computer
- Maintenance, diagnostics, and minor troubleshooting
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Computer operating guidelines, routine care, and shipping preparation
- Electrostatic discharge
- Accessibility
- Index
Table 2-4 Tower rear components and their descriptions
Item Icon Component Item Icon Component
1
Audio line-in connector
(blue)
7 Expansion slot covers (4)
2 Audio line-out connector
(green)
8 Power connector
3 DisplayPort™ (DP)
connectors (2)
9 Antenna cover
4 Serial port (optional) 10 RJ-45 (network) jack
5 USB ports (2) 11 Access panel release
latch
6 USB SuperSpeed Plus
ports (2)
12 USB SuperSpeed port
NOTE: The labels for the rear panel connectors use industry-standard icons and colors.
NOTE: The DP ports are not supported when the system is congured with Intel® Xeon® E3-12x0 v5 processors. For all other
processors, these DP ports are disabled by default when a discrete graphics card is installed.
NOTE: Simultaneous use of integrated Intel HD graphics and discrete graphics cards to drive more than two monitors can be enabled
using Computer Setup. However, HP recommends using only discrete graphics cards when attaching three or more monitors.
Product specications
Read this section to learn where to nd the technical specications about your computer.
To nd the QuickSpecs for your product, go to http://www.hp.com/go/quickspecs, and then click the link. Click
Search all QuickSpecs, type your model name in the search box, and then click Go.
– or –
Product
specications
7