Maintenance and Service Guide

Description Spare part number
Rose gold 933301-001
Silk gold L00662-001
Hinges (left and right) 926527-001
Hinge covers
Left, jet black 926533-001
Right, jet black 926534-001
Left, snow white 926535-001
Right, snow white 926536-001
Left, pike silver 926537-001
Right, pike silver 926538-001
Left, rose gold 926542-001
Right, rose gold 926543-001
Left, champagne rose 926544-001
Right, champagne rose 926545-001
Left, silk gold 928883-001
Right, silk gold 928884-001
Webcam/microphone module
HD 919471-003
VGA 919472-003
Touch control board (includes tape and EMI foil) 926532-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 32).
5. Remove the optical drive (see Optical drive on page 34).
6. Remove the bottom cover (see Bottom cover on page 41).
7. Remove the fan (see Fan on page 58).
8. Remove the heat sink (see Heat sink assembly on page 59).
To remove the display assembly:
1. Remove the black Mylar tape from near each hinge (1).
2. Disconnect the wireless antenna cables from the WLAN module (2).
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts