Instruction Manual

CAUTION:
IfyoudecideNOTtoPowerOffwhileworkinginthePowerOffmenu,thePowerOffSystemNOoption
must be display
ed before you press the ESC (
) push-button to avoid power-down.
1. Press to scroll to the Shutdown Options menu.
2. Press
to select the Shutdow n Options menu .
3. Press
to scroll to Power Off.
4. Press
to select Power Off.
5. Power Off System NO is displayed. Press
to accept NO. Press to d isplay Power Off System
YES.
6. Press
to accept YES.
7. Press
to go to POWER OFF SYSTEM.
Once you have selected the Shutdown System function, you can select and execute a shutdown method
as described in the following sections.
Restarting the system
T o restore the controller to an operational state, use the following procedure to restart the system.
1. Press
to scroll to the Shutdown Options menu.
2. Press
to select the Shutdow n Options menu .
3. Press
to select Restart.
4. Press
to display RESTART SYSTEM NO.
Press
to scroll to Power Off.
5. Press
to accept NO.
Press
to scroll to RESTART SYSTEM YES.
6. Press
to accept YES andtogotoHSV110Startup.
7. No user input is required. The system will automatically initiate the startup procedure and proceed
to load the Storage System Name and Node WorldWide Name information from the operational
controller.
Powering off the system
Use the following procedure to remove power from the controller pair, save the data, and remove the
storagesystemfromCommandViewEVA.
NOTE:
Implementing this procedure removes power from the controller pair and all associated drive shelves. To
restorepowertothecontrollersystem,youmustcyclebothPDUbreakersintheenclosure.
1. Press to scroll to the Shutdown Options menu.
2. Press
to select the Shutdow n Options menu .
3. Press
to select Restart.
4. Press
to scroll to Power Off.
100
Storage system hardware components