Instruction Manual

5. Observe the EMU to ensure the error is corrected.
6. Reset the EMU, then obser ve the EMU to ensure the error is corrected.
7. If resetting the EMU did not correct the problem, contact your HP authorized service representative.
0.7.01.15 UNRECOVERABLE condition—EMU hardware failure
The EMU has dete
cted an internal hardware problem. This condition report remains active until the
problem is corrected.
Complete the following procedure to correct this problem:
1. Record all six characters of the condition report.
2. Reset the EMU
.
3. O bserve the EMU to ensure the error does not recur within the first minute.
4. If the error do es recur, contact your H P authorized service representative. The EMU is inoperative
andmustber
eplaced as soon as possible.
0.7.01.16 INFORMATION condition—EMU internal ESI data corrupted
The EMU ESI data is corrupted. This condition does not affect any other element and no action is required.
0.7.01.17 UNRECOVER ABLE condition—Power shutdown failure
The power su
pply did not respond to a c ontroller, EMU, or power supply shut down command. Shutting
down the supply is required to prevent overheating.
Complete the following procedure to correct the problem:
1. Record all six characters of the condition report.
2. Move the power cord bail lock 1, Figure 62,totheleft.
3. Disconnect the AC power cord 2 from the supply.
CXO7490
A
2
3
1
4
Figur
e 62 Disconnecting AC power
0.7.01.18 UNRECOVER ABLE condition—EMU hardware failure
The EMU has detected an internal hardware problem. This condition report remains active until the
problem is corrected.
Complete the following procedure to correct this problem:
Enterprise Virtual Array 3000/5000 user guide (VCS 3.110)
147