Instruction Manual

7. Make virtual disks available to their hosts. Refer to the storage system software documentation for
each host’s operating system.
Gathering Info
rmation
Below is import
ant information you need to know prior to operating the Enterprise Virtual Array. Retrieve
the items described below to assist you in completing initialization.
Locate the following items to install the storage system:
• HP StorageWorks Enterprise Virtual Array W orld Wide Name Label, which is a separate sheet
of paper shipped with the system.
• HP StorageWo
rks Enterprise Virtual Array Read Me First document.
• If you b ought a license for the snapshot feature, the instructions for installing license keys are
included in the HP StorageWorks Business Copy License Instructions document included with your
replication license package. If you also bought Continuous Access EVA, licensing instructions are
found in the HP StorageWorks Continuous Access EVA G etting Started Guide.
• The latest
HP OpenView Storage Management Appliance Update, which consists of the
management appliance update CD and its associated documentation.
• You can determine the latest update version available by checking your Release Notes
or contacting your authorized service representative to find out how to receive the latest
information.
•Theboxed
kit for the operating system of the host computer. If there are hosts running different
operati
ng systems, you will n ee d a boxed kit for each operating system. This kit ships
separat
ely from the storage system.
• The boxed kit that contains the hardware documentation and ships with the system. That is
the box that this manual came in.
Locate t
hese items and keep them handy. You will need them for procedures in the rest of this ma nual.
Host information
HP recommends that you make a list of information for each computer (host) that will be used in the
storage system. The information you will need for each host is as follows:
• TheLANnameofthehost
• A list of World Wide Names of the FC adapters, also called host bus adapters, through which the
host will connect to the fabric or fabrics that provide access to the storage system
• IP address of each host
• Operating system type
• Available LUN numbers
Addi
tional documentation
For complete information about all documents that pertain to the Enterprise Virtual Array a n d any other
additional documentation that may be required to operate your storage system, see the HP StorageWorks
Enterprise Virtual Array information page, available at: h
ttp://www. hp.com/ go/eva5000.
Failback Preference Setting for HSV controllers
Table 2 describes the failback preference mode for each of the operating systems supported with HSV
controllers and HP Command View EVA.
Table 3 describes the failback default behavior and settings allowed for each operating system. The table
indicates when Secure Path is used in conjunction with the operating system
Enterprise Virtual Array 3000/5000 user guide (VCS 3.110)
33