Instruction Manual

Configuring the Qlogic iSCSI HBA
To configure the QLogic iSCSI HBA:
1. Start QLogic SMS either from the desktop icon or through Start/Programs and connect to localhost
(see Figure 58).
2. Click Yes to start the general configuration wizard (see Figure 59). Use the Wizard to:
• Choose iSCSI HBA port to configure the QLogic iSCSI HBA
• Configure HBA Port network settings
• Configure HBA Port DNS settings (optional)
• Configure SLP Target Discovery settings (optional)
• Configure iSNS Target Discovery settings (optional)
Figure 58 Connect to host screen
.
Setting up the iSCSI Initiator for multipathing110