Instruction Manual

6. Select the Target Settings tab. Verify that the HBA state is Ready, Link Up and each target entry’s
state is Session Active (Figure 61).
Figure 61 Target settings tab
.
Presenting LUNs to the QLogic iSCSI Initiator
To present LUNs to the QLogic iSCSI Initiator:
1. Follow procedures in “Creating an iSCSI initiator host via HP Command View EVA” on page
128 to:
• Create an iSCSI host entry, and
• Present LUNs to the iSCSI host
2. On the iSCSI HBA tab (Figure 62) verify that the QLogic iSCSI HBA is connected to the iSCSI
LUNs in SMS under the HBA iSCSI port.
Figure 62 HBA iSCSI port connections
.
Setting up the iSCSI Initiator for multipathing112