Instruction Manual

cancel
Terminates an Admin session opened by another user. Use this keyword
with care because it terminates the Admin session without warning the
other user and without saving pending changes.
Closing a Telnet window during an admin session does not release the
session. In this case, you must either wait for the Admin session to time
out, or use the Admin Cancel command.
Notes
The following example shows how to start and end an Admin session:
mpx100 #> admin start
Password: ******
mpx100(admin) #>
.
.
.
mpx100(admin) #> admin end
mpx100 #>
Examples
Beacon command
Enables or disables the flashing of the LEDs. This command does not require an Admin session.
NoneAuthority
beacon
on
off
Syntax
on: Turns on the mpx100/100b beacon.Keywords
off
off: Turns off the mpx100/100b beacon.
mpx100 #> beacon onExample
Date command
Displays or sets the date and time. The information string must be provided in the format
MMDDhhmmCCYY. The new date and time take effect immediately.
Admin session only to set dateAuthority
date
[MMDDhhmmCCYY]
Syntax
EVA iSCSI Connectivity User Guide 141