Instruction Manual

The following is an example of the show perf command:
mpx100 #> show perf
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 0 0 0 27K 27K
GE2 0 0 0 0 0
FC1 0 0 0 0 0
FC2 0 27K 0 0 27K
Examples
Show Properties command
Displays the values of both the Inactivity Timer and the CLI Prompt name.
NoneAuthority
show propertiesSyntax
The following is an example of the show properties command:
mpx100 #> show properties
CLI Properties
----------------
Inactivty Timer 15 minutes
Prompt String mpx100
Examples
Show System command
Displays the mpx100/100b product information, including serial number, software and hardware
versions, configuration, and temperature.
NoneAuthority
show systemSyntax
Command line interface160