Instruction Manual

The following is an example of the show lunmask command:
mpx100 #> show LUNmask
Index (WWNN,WWPN/iSCSI Name)
---------------------------
0 50:00:1f:e1:50:01:11:50,50:00:1f:e1:50:01:11:58
1 50:00:1f:e1:50:06:9d:20,50:00:1f:e1:50:06:9d:2c
Please select a Target from the list above ('q' to quit): 0
LUN WWULN Vendor
----------------------
0 50:00:1f:e1:50:01:11:50:00:00:00:00:00:00:00:00 COMPAQ
1 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:9a:00:00 COMPAQ
2 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:9f:00:00 COMPAQ
3 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a2:00:00 COMPAQ
4 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a5:00:00 COMPAQ
5 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a8:00:00 COMPAQ
6 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:ab:00:00 COMPAQ
7 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:ae:00:00 COMPAQ
8 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:bb:00:00 COMPAQ
Please select a LUN from the list above ('q' to quit): 1
Target 50:00:1f:e1:50:01:11:50,50:00:1f:e1:50:01:11:58
LUN Initiator
--------------------
1 iqn.1991-05.com.microsoft:hp-8qdaqlxt
Examples
Show NTP command
Displays LUN mappings.
NoneAuthority
show ntpSyntax
The following is an example of the show ntp command:
mpx100 #> show ntp
NTP Information
-----------------
Mode Disabled
Status Offline
TimeZone Offset (Hours) 0
Examples
Show Presented Targets command
Displays targets presented by the mpx100/100b, either FC and/or iSCSI.
NoneAuthority
Command line interface166