Instruction Manual

show snmpSyntax
The following is an example of the show snmp command:
mpx100 #> show snmp
SNMP configuration
------------------------------
Read Community Public
Trap Community Private
System Location
System Contact
Authentication traps
System OID 1.3.6.1.4.1.3873.1.4
System Description HP StorageWorks mpx100
Trap Destination 1
IP Address 10.0.0.5
Trap Port 1024
Trap Version 2
Examples
Show Stats command
Displays the mpx100/100b for statistics, FC and iSCSI.
NoneAuthority
show statsSyntax
Command line interface168