Instruction Manual

The following is an example of the show targets fc command:
mpx100 #> show targets fc
Target Information
--------------------
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
Port ID 01-0d-00
Portal No. 1
State Online
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Port ID 01-08-00
Portal No. 1
State Online
The following is an example of the Show Targets iSCSI command:
mpx100 #> show targets iscsi
No Targets found.
Examples
Show VLAN command
See the show iscsi command.
Target command
Removes targets from the mpx100/100b database. This command is typically used to remove targets
that are no longer connected to the mpx100/100b from its database.
Admin session only to set.Authority
targetSyntax
add
rm
Keywords
The following is an example of the target command:
mpx100 (admin) #> target rm
Index (WWNN,WWPN/iSCSI Name)
---------------------------
0 20:00:00:20:37:fd:8b:ab:00:00:00:00:fc:b6:1f:fa
Please select an 'OFFLINE' Target from the list above ('q' to quit): q
Command aborted.
Examples
Command line interface172