Instruction Manual

Figure 18 Gigabit Ethernet (iSCSI) ports
.
1. Activity LED
2. Status LED
Port LEDs
The iSCSI/TOE ports each have two LEDs: the Link Status LED (green) and the Activity LED (green).
Activity LED (green)
The Activity LED illuminates when data is being transmitted or received over the Ethernet connection.
Link Status LED (green)
The Link Status LED illuminates continuously when an Ethernet connection has been established.
Management Ethernet port
The management Ethernet port shown in Figure 19 is an RJ-45 connector. It provides a connection to
a management server through a 10/100 Base-T Ethernet cable. The port is labeled MGMT.
The management server is a Windows server that is used to configure and manage the mpx100/100b.
You can manage the mpx100/100b over an Ethernet connection using the mpx Manager or the CLI.
The management Ethernet port has two LEDs: the Link Status LED (green) and the Activity LED (green).
The Link Status LED illuminates continuously when an Ethernet connection is established. The Activity
LED illuminates when data is transmitted or received over the Ethernet connection.
Figure 19 Management Ethernet port
.
1. Status LED
Configuring the mpx100/100b56