User Manual

Storage System Hardware Components
114 Enterprise Virtual Array 3000 User Guide
Alphanumeric LCD
The alphanumeric LCD is a two-row display, with each row capable of displaying
up to 20 alphanumeric characters. During normal operation, the LCD alternates
between displaying the Storage System Name and the Node WorldWide Name.
See Figure 52.
Note: An active (Flashing) display, an error condition message, or a user entry
(pressing a pushbutton) overrides the default display. When none of these conditions
exist, the default display is active after approximately 15 seconds.
.
Figure 52: Sample Default LCD display
Displaying the OCP Menu Tree
The OCP menu tree provides options for viewing status and configuration
information, and performing the available tasks. To display the menu tree, press
any pushbutton when either of the default displays is active.
■ The System Information and Fault Management menus are used to display
information only. You cannot change any operating parameters from these
menus. Information about the Fault Management menu is included in “HSV
Controller Fault Management” on page 189.
■ The Shutdown System menu lets you implement the procedure for shutting
down the storage system in a logical, sequential manner. Using the Shutdown
System procedure maintains data integrity.
■ The System Password menu lets you create a system password to ensure that
only authorized personnel can manage the storage system from Command
View EVA.
The OCP menu tree options are shown in Figure 53.
Storage System Name:
SCELL22MAY200111543
Node WorldWide Name:
5000-1FE1-0000-0000