User Manual

Storage System Startup
43Enterprise Virtual Array 3000 User Guide
Entering the WWN Checksum
The second part of the WWN entry procedure is to enter the 2-character
checksum. In this sample procedure, the checksum HS is entered.
4. The WWN entry display appears with a 0 in
each of the 16 positions.
Enter WorldWide Name
0000-0000-0000-0000
5. On either controller, press S or T until the
first character display is 5. Press X to accept
this character and select the next.
Enter WorldWide Name
5000-0000-0000-0000
6. Repeat Step 5 to enter the remaining
characters 000-1FE1-0000-0000.
Enter WorldWide Name
5000-1FE1-0000-0000
7. Press W to
enter the WWN and select the
checksum entry mode.
Enter WWN Checksum
00
Continue with “Entering the WWN Checksum”.
1. The initial WWN checksum entry display
appears with a 0 in both positions.
Enter WWN Checksum
00
2. Press S or Tuntil the first character is H.
Press X to accept H and select the second
character.
Enter WWN Checksum
H0
3. Press S or Tuntil the second character is S.
Press W to accept the checksum and exit.
Enter WWN Checksum
HS
4. The default display appears indicating that all
data entered is valid.