Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-8
Parameter
interval: Automatic test interval in the range 0 to 65535 seconds. It defaults to 0,
meaning no automatic test.
Description
Use the frequency command to configure an automatic test interval.
Use the undo frequency command to disable automatic test.
The system automatically tests at intervals specified by this command, where the
argument interval is greater than 0.
Related command: count.
Example
# Set the automatic test interval to 10 seconds.
[Router-administrator-icmp] frequency 10
3.1.10 ftp-operation
Syntax
ftp-operation { get | put }
View
HWPing test group view
Parameter
get: Gets a file from an FTP server.
put: Sends a file to an FTP server.
Description
Use the ftp-operation command to configure the FTP operation done by the system.
To FTP a file from a server, use the ftp-operation get command. To FTP a file to a
server, use the ftp-operation put command.
The default FTP operation type is get.
 Note:
This command applies only to FTP test.
Related command: username, password.