Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 MPLS L2VPN Configuration Commands
3Com Corporation
3-10
Description
Use the connection command to create a CE connection.
Use the undo connection command to delete a CE connection.
Configure RD for MPLS L2VPN first before establishing a CE connection.
Related command: mpls l2vpn encapsulation and ccc.
Example
# Establish a CE connection.
[3Com ] mpls l2vpn vpna
[3Com -l2vpn-vpna] ce ce-a id 1 range 4
[3Com -l2vpn-vpna-ce-ce-a] connection s0/0/0 ce-offset 2
3.4.3 display bgp l2vpn
Syntax
display bgp l2vpn { all | peer | route-distinguisher }
View
Any view
Parameter
all: All L2VPN information in the current address family.
peer: Information of the specified BGP peer.
route-distinguisher: Information of the specified VPN RD.
Description
Use the display bgp l2vpn all command to view system operating information and all
L2VPN information.
Example
# Display all L2VPN information.
[3Com ] display bgp l2vpn all
BGP local router ID is 172.16.1.5 , Origin codes: i - IGP, e - EGP, ? -
incomplete
bgp.l2vpn: 3 destinations
CE ID Label Offset Label Base nexthop pref as-path
Route Distinguisher: 100:1