Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-1
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
1.1 AAA Configuration Commands
1.1.1 access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameter
disable: No limit to the supplicant number in the current ISP domain.
enable max-user-number: Specifies the maximum supplicant number in the current
ISP domain, ranging from 1 to 1048.
Description
Use the access-limit command to configure a limit to the amount of supplicants in the
current ISP domain.
Use the undo access-limit command to restore the limit to the default setting.
By default, there is no limit to the amount of supplicants in the current ISP domain.
This command limits the amount of supplicants contained in the current ISP domain.
The supplicants may compete for the network resources. So setting a suitable limit to
the amount will guarantee the reliable performance to the existing supplicants.
Example
# Set a limit of 500 supplicants for the ISP domain huawei163.net.
[3Com-isp-huawei163.net] access-limit enable 500
1.1.2 accounting
Syntax
accounting
{ hwtacacs-scheme hwtacacs-scheme-name | radius-scheme
radius-scheme-name | none }