Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-5
hwtacacs-scheme hwtacacs-scheme-name: Specifies the HWTACACS scheme for
authorization.
none: Specifies not to perform authorization, that is, the system provides services
without authorization.
Description
Use the authorization command to configure an authorization scheme for the current
ISP domain.
Use the undo authorization command to restore the default authorization scheme of
the domain.
By default, no separate authorization scheme is available.
Note that the HWTACACS authorization scheme specified in this command must have
existed.
If you configure the authorization command in ISP domain view, the system uses the
scheme specified in the command for authorization. Otherwise, the system uses the
scheme specified by using the scheme command.
Related command: scheme, radius scheme, hwtacacs scheme.
Example
# Specify ISP domain h3c to use HWTACACS scheme hwtac for authorization.
[3Com-isp-h3c] authorization hwtacacs-scheme hwtac
1.1.6 display connection
Syntax
display connection [ domain isp-name | hwtacacs-scheme hwtacacs-scheme-name
| ip ip-address | mac mac-address | radius-scheme radius-scheme-name | ucibindex
ucib-index | user-name user-name ]
View
Any view
Parameter
domain isp-name: Displays all the user connections belonging to the ISP domain
specified by isp-name, a character string not exceeding 24 characters. The specified
ISP domain must be an existing one.
hwtacacs-scheme hwtacacs-scheme-name: HWTACACS scheme name.
ip ip-address: Displays all the user connections related to the specified IP address.
mac mac-address: Displays a user connection by specifying its hexadecimal MAC
address in the format of x-x-x.