Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-6
radius-scheme radius-scheme-name: Displays all the user connections connected to
the RADIUS server specified by radius-scheme-name, a character string not exceeding
32 characters.
ucibindex ucib-index: Displays information on a user connection by specifying its
connection index number, that is, ucib-index ranging from 0 to 1047.
user-name user-name: Displays information on a user connection by specifying its
user ID, or the user name excluding the domain name. This user name comprises up to
55 characters, excluding forward slashes (/), colons (:), asterisks (*), question marks
(?), less-than signs (<), and greater-than signs (>).
Description
Use the display connection command to view the relevant information on the
specified user connection or all the connections. The output can help you troubleshoot
user connections.
By default, information about all user connections is displayed.
Example
# Display information on the connections of the user system.
<3Com> display connection domain system
Index=0 ,Username=hfx@system
IP=188.188.188.3
Total 1 connections matched, 1 listed.
Table 1-1 Description on the fields of the display connection command
Field Description
Index Index number
Username User name
IP IP address of the user
1.1.7 display domain
Syntax
display domain [ isp-name ]
View
Any view
Parameter