Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-7
isp-name: Specifies the ISP domain name, with a character string not exceeding 24
characters. The specified ISP domain must be an existing one.
Description
Use the display domain command to view the configuration of a specified ISP domain
or display the summary information of all ISP domains.
By default, the summary of all ISP domains is displayed.
This command is used to output the configuration of a specified ISP domain or display
the summary information of all ISP domains. If an ISP domain is specified, the
configuration information will be displayed exactly the same, concerning the content
and format, as the displayed information of the display domain command. The output
information can help with ISP domain diagnosis and troubleshooting.
Related command: access-limit, domain, scheme, state, display domain.
Example
# Display configuration information for the test domain.
[Router] display domain test
The contents of Domain test:
State = Active
Current Authentication : RADIUS Scheme = test
Current Authorization: TACACS Scheme = hwt
Current Accounting : RADIUS Scheme = rad
Accounting Optional = Disable
Access-limit = Disable
Domain User Template:
Table 1-2 Description on the fields of the display domain command
Field Description
The contents of Domain test
Configuration information of the test
domain
State State of the domain user: active or block
Current Authentication Authentication scheme for the domain
Current Authorization Authorization scheme for the domain
Current Accounting Accounting scheme for the domain
Accounting Optional
State of optional accounting: enable or
disable
Access-limit
State of the restriction on the concurrent
connected users accommodated by the
domain user: disable or enable
Domain User Template Domain user template