Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-8
1.1.8 display local-user
Syntax
display local-user [ domain isp-name | service-type { telnet | ssh | terminal | pad |
ftp | ppp } | state { active | block } | user-name user-name ]
View
Any view
Parameter
domain isp-name: Displays all the local users in the ISP domain specified by isp-name,
a character string not exceeding 24 characters. The specified ISP domain must be an
existing one.
service-type: Displays local users by specifying service type, which can be telnet, ssh,
terminal (terminal users logging on from Console, AUX, or Asyn port), ftp, ppp, or PAD
(X.25 PAD).
state { active | block }: Displays local users by specifying user state, where active
means users allowed to request for network services and block means the opposite.
user-name user-name: Displays a user by specifying its user-name, a character string
not exceeding 80 characters. It must exclude forward slashes (/), colons (:), asterisks
(*), question marks (?), less-than signs (<), and greater-than signs (>). The @ sign can
be present once in a user name. The user name without domain name (the part before
@, namely the user ID) cannot exceed 55 characters.
Description
Use the display local-user command to view the relevant information on the specified
local user or all the local users. The output can help you troubleshoot faults related to
local user.
By default, information on all local users is displayed.
Related command: local-user.
Example
# Display the relevant information of all the local users.
<3Com> display local-user
The contents of local user admin:
State: Active ServiceType Mask: FTC
Idle-cut: Disable
Access-limit: Disable Current AccessNum: 0
Bind location: Disable