Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-10
Field Description
Bind location
Information on the binding of the service
to port
VLAN ID VLAN to which the user belongs
IP address IP address of the user
MAC address MAC address of the user
User Privilege User’s privilege
FTP Directory Directory authorized to the FTP user
1.1.9 domain
Syntax
domain [ isp-name | default { disable | enable isp-name } ]
undo domain isp-name
View
System view
Parameter
isp-name: Specifies an ISP domain name. It comprises up to 24 characters, excluding
forward slashes (/), colons (:), asterisks (*), question marks (?), less-than signs (<), and
greater-than signs (>).
default: Configures the default ISP domain. The system-default ISP domain is named
system. When you perform the display current-configuration command, you can see
the default ISP domain name if it is manually configured as opposed to the
system-defaut one.
disable: Disables the configured default ISP domain. Unqualified usernames, which
are not suffixed with a domain name, in this case will be rejected.
enable: Enables the configured default ISP domain. It is to be suffixed to received
unqualified usernames before being sent to AAA servers.
Description
Use the domain command to configure an ISP domain or enter the view of an existing
ISP domain.
Use the undo domain command to cancel a specified ISP domain.
By default, the system uses the domain named system. You are not allowed to delete
this domain, but you can view its settings by executing the display domain command.