Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-13
Related command: local user.
 Note:
If the configured authentication mode is none authentication or password
authentication, the command level that a user can access after login depends on the
priority of user interface. In the case of authentication requiring both username and
password, however, the accessible command level depends on user priority level.
Example
# Set the priority level of the user to 3.
[3Com-luser-huawei1] level 3
1.1.12 local-user
Syntax
local-user user-name
undo local-user { user-name | all }
View
System view
Parameter
user-name: Specifies a local username with a character string not exceeding 80
characters, excluding forward slashes (/), colons (:), asterisks (*), question marks (?),
less-than signs (<), and greater-than signs (>). The @ sign can be used only once in
one username. The username without domain name (the part before @, namely the
user ID) cannot exceed 55 characters. user-name is case-insensitive, so UserA and
usera are the same.
all: All the users.
Description
Use the local-user command to add a local user and enter the local user view.
Use the undo local-user command to remove the specified local user.
By default, no local user is configured.
Related command: display local-user.
Example
# Add a local user named huawei1.