Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-18
Use the undo service-type ftp ftp-directory command to restore the default directory
accessible for the FTP user.
By default, no services of any type are authorized to any user and access of
anonymous FTP users is not allowed, but a user that is granted the FTP service is
authorized to access the root directory "flash:/".
Related command: service-type and service-type ppp.
Example
# Authorize the user to use the FTP service.
[3Com-luser-huawei1] service-type ftp
1.1.18 service-type ppp
Syntax
service-type ppp [ callback-nocheck | callback-number callback-number |
call-number call-number [ : subcall-number ] ]
undo service-type ppp [ callback-nocheck | callback-number | call-number ]
View
Local user view
Parameter
callback-nocheck: Specifies PPP user callback without authentication.
callback-number callback-number: Specifies a callback number.
call-number call-number: Specifies a caller number in ISDN user authentication, with a
length up to 64 bytes.
[ : subcall-number ]: Specifies the sub-caller number. If included, the total length of it
plus the caller number cannot exceed 62 bytes.
Description
Use the service-type command to configure the callback attribute and caller number of
the PPP user.
Use the undo service-type command to restore their default settings.
By default, no services of any type are authorized to any users; if the PPP service is
authorized, call back without authentication applies and no callback number is
specified; and the system does not authenticate the caller number of ISDN users.
Related command: service-type and service-type ftp.
Example
# Set PPP user to call back without authentication.