Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-22
Description
Use the data-flow-format command to configure the unit in which data flows are sent
to a RADIUS Server.
Use the undo data-flow-format command to restore the unit to the default setting.
By default, data flows are sent in bytes and data packets in the units of one-packet.
Related command: display radius.
Example
# Send data flows and packets destined for the RADIUS server "Huawei" in kilobytes
and kilo-packets.
[3Com-radius-huawei] data-flow-format data kilo-byte packet kilo-packet
1.2.3 debugging radius
Syntax
debugging radius packet
undo debugging radius packet
View
User view
Parameter
packet: Enables packet debugging.
Description
Use the debugging radius command to enable RADIUS debugging.
Use the undo debugging radius command to disable RADIUS debugging.
By default, RADIUS debugging is disabled.
Example
# Enable RADIUS debugging.
<3Com> debugging radius packet
1.2.4 debugging local-server
Syntax
debugging local-server { all | error | event | packet }
undo debugging local-server { all | error | event | packet }