Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-24
Example
# Display statistics of the local RADIUS authentication server.
<3Com> display local-server statistics
The localserver packet statistics:
Receive: 82 Send: 61
Discard: 21 Receive Packet Error: 0
Auth Receive: 82 Auth Send: 61
Acct Receive: 0 Acct Send: 0
1.2.6 display radius
Syntax
display radius [ radius-scheme-name | statistics ]
View
Any view
Parameter
radius-scheme-name: Specifies a RADIUS scheme with a string not exceeding 32
characters and excluding forward slashes (/), colons (:), asterisks (*), question marks
(?), less-than signs (<), and greater-than signs (>). If no scheme is specified, all
RADIUS schemes are displayed.
statistics: Displays statistics.
Description
Use the display radius command to view the configuration information about the
specified or all RADIUS schemes or to view statistics about RADIUS.
By default, the configuration information about all RADIUS schemes is displayed.
Related command: radius scheme.
Example
# Display the configurations of all RADIUS schemes.
<3Com> display radius
------------------------------------------------------------------
SchemeName =system Index=1 Type=huawei
Primary Auth IP =127.0.0.1 Port=1645 State=active
Primary Acct IP =127.0.0.1 Port=1646 State=active
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei