Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-12
Example
# Set the maximum number of concurrent tests to 4.
[Router] hwping-agent max-requests 4
3.1.16 jitter-interval
Syntax
jitter-interval interval
undo jitter-interval
View
HWPing test group view
Parameter
interval: Packet sending interval in a jitter test. It is in the range 10 to 1000 milliseconds
and defaults to 20 milliseconds.
Description
Use the jitter-interval command to set a packet sending interval for a jitter test.
Use the undo jitter-interval command to restore the default.
 Note:
This command applies only to jitter test.
Related command: jitter-packetnum.
Example
# Send packets at intervals of 30 milliseconds in a jitter test.
[Router-administrator-icmp] jitter-interval 30
3.1.17 jitter-packetnum
Syntax
jitter-packetnum number
undo jitter-packetnum
View
HWPing test group view