Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-30
1.2.8 display stop-accounting-buffer
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
View
Any view
Parameter
radius-scheme radius-scheme-name: Displays information on buffered
stop-accounting requests related to the RADIUS scheme specified by
radius-scheme-name. It is a string not exceeding 32 characters and excluding forward
slashes (/), colons (:), asterisks (*), question marks (?), less-than signs (<), and
greater-than signs (>).
session-id session-id: Displays information on the buffered stop-accounting requests
related to the session ID specified by session-id, a character string not exceeding 50
characters.
time-range start-time stop-time: Displays the buffered stop-accounting requests by the
time range of requests. It is specified by start-time and stop-time in the format of
hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd, that is,
hours:minutes:seconds-months/days/years or
hours:minutes:seconds-years/months/days.
user-name user-name : Displays information on the buffered stop-accounting requests
by user ID, or user name excluding the domain name. This user name comprises up to
55 characters, excluding forward slashes (/), colons (:), asterisks (*), question marks
(?), less-than signs (<), and greater-than signs (>).
Description
Use the display stop-accounting-buffer command to view information on the
stop-accounting requests buffered in the router by RADIUS scheme, session ID, or
time range. The displayed packet information can help you troubleshoot RADIUS
faults.
If receiving no response after sending a stop-accounting request to a RADIUS server,
the router buffers the request packet and retransmits it. The number of allowed
transmission attempts can be set using the retry stop-accounting command.
Related command: reset stop-accounting-buffer, stop-accounting-buffer enable,
and retry stop-accounting.