Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-34
View
RADIUS view
Parameter
ip-address: IP address in dotted decimal format. By default, IP address of the primary
accounting server is 0.0.0.0.
port-number: UDP port number of the primary accounting server, which is ranging from
1 to 65535 and defaults to 1813.
Description
Use the primary accounting command to configure IP address and port number of the
primary RADIUS accounting server.
Use the undo primary accounting command to restore the default IP address and
port number of the primary RADIUS accounting server.
After creating a RADIUS scheme, you are supposed to configure IP address and UDP
port of each RADIUS server (primary/secondary authentication/authorization or
accounting server). The configuration of RADIUS servers is at your discretion except
that there must be at least one authentication/authorization server and one accounting
server. Besides, ensure that the RADIUS service port settings on the router are
consistent with the port settings on the RADIUS servers.
Related command: key, radius scheme, and state.
Example
# Set the IP address of the primary accounting server in the RADIUS scheme “huawei”
to 10.110.1.2 and use the UDP port 1813 to provide the RADIUS accounting service.
[3Com-radius-huawei] primary accounting 10.110.1.2 1813
1.2.13 primary authentication
Syntax
primary authentication ip-address [ port-number ]
undo primary authentication
View
RADIUS view
Parameter
ip-address: IP address in dotted decimal format. By default, the IP address of the
primary authentication/authorization server is 0.0.0.0.