Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-37
This command specifies only one source address; therefore, the newly configured
source address may overwrite the original one.
Related command: nas-ip.
Example
# Configure the router to send RADIUS packets from 129.10.10.1.
[3Com] radius nas-ip 129.10.10.1
1.2.16 radius trap
Syntax
radius trap { authentication-server-down | accounting-server-down }
undo radius trap { authentication-server-down | accounting-server-down }
View
System view
Parameter
authentication-server-down: The state of the RADIUS authentication server changes
to down.
accounting-server-down: The state of the RADIUS accounting server changes to
down.
Description
Use the radius trap command to enable the RADIUS server to send traps when it goes
down.
Use the undo radius trap command to disable the RADIUS server to send traps when
it goes down.
By default, the RADIUS server does not send traps when it goes down.
Example
# Enable the RADIUS authentication server to send traps when it goes down.
[3Com] radius trap authentication-server-down
1.2.17 reset radius statistics
Syntax
reset radius statistics