Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-13
Parameter
number: Number of packets to be sent in a jitter test. It is in the range 10 to 100 and
defaults to 20.
Description
Use the jitter-packetnum command to configure the number of packets to be sent in a
jitter test.
Use the undo jitter-packetnum command to restore the default, or 20.
 Note:
This command applies only to jitter test.
Related command: jitter-interval.
Example
# Send 30 packets in a jitter test.
[Router-administrator-icmp] jitter-packetnum 30
3.1.18 password
Syntax
password password
undo password
View
HWPing test group view
Parameter
password: Password required at login.
Description
Use the password command to configure the password required for logging onto the
FTP server.
Use the undo password command to cancel the configured password.
By default, no password is configured for logging onto the FTP server.